|
|
| Строка 2: |
Строка 2: |
| = Шаблон Wiren Board Ensystec Leak Protect для XIOT = | | = Шаблон Wiren Board Ensystec Leak Protect для XIOT = |
|
| |
|
| Это рабочий кастомный шаблон <code>wb-mqtt-serial</code> для подключения <code>Ensystec Leak Protect</code> к XIOT через Wiren Board. | | Это кастомный JSON-шаблон <code>wb-mqtt-serial</code> для подключения <code>Ensystec Leak Protect</code> к XIOT через Wiren Board. |
|
| |
|
| Версия зафиксирована 2026-06-09 после проверки на контроллере <code>192.168.88.27</code>.
| | == Скачать шаблон == |
|
| |
|
| <pre>
| | Скачать файл: [[Медиа:Config-ensystec.xiot-final.json|Config-ensystec.xiot-final.json]] |
| SHA256: 09622150ba7dc4a4c11062fba031c116cd73cf7c9fd8c34f3ee36f443e2d4568
| | |
| Локальная копия: /Users/xiot/Projects/xiot_wb/Шаблоны/ensystec/config-ensystec.xiot-final.json
| | Страница файла: [[:Файл:Config-ensystec.xiot-final.json]] |
| Рекомендуемый путь на Wiren Board: /etc/wb-mqtt-serial.conf.d/templates/config-ensystec.json
| |
| </pre>
| |
|
| |
|
| == Зачем нужен этот шаблон == | | == Зачем нужен этот шаблон == |
|
| |
|
| Шаблон нужен для стабильной привязки Ensystec к характеристикам XIOT без <code>wb-rules</code>. Он разделяет теги состояния и теги управления для флага протечки, включения защиты и статуса кранов. Низкоуровневые команды Ensystec, которые пишут отдельные биты регистра <code>CONTROL0</code>, скрыты из обычного интерфейса, чтобы их не привязывали напрямую к характеристикам XIOT. | | Шаблон нужен для стабильной привязки Ensystec к характеристикам XIOT без <code>wb-rules</code>. Он разделяет теги состояния и теги управления для флага протечки, включения защиты и статуса кранов. |
|
| |
|
| Основная статья по подключению: [[Подключение Ensystec в XIOT через Wirenboard]]. Общая инструкция по размещению шаблонов: [[Пользовательские шаблоны устройств Wiren Board]].
| | В штатном шаблоне Wiren Board часть команд Ensystec представлена как низкоуровневые битовые операции. Для XIOT удобнее и безопаснее использовать отдельные теги состояния и управления, чтобы команда не отправлялась повторно как состояние. |
|
| |
|
| == JSON шаблона == | | == Установка == |
| | |
| | Скачанный файл нужно разместить на контроллере Wiren Board в пользовательской директории шаблонов под именем <code>config-ensystec.json</code>: |
|
| |
|
| <pre> | | <pre> |
| {
| | /etc/wb-mqtt-serial.conf.d/templates/config-ensystec.json |
| "title": "template_title",
| | </pre> |
| "device_type": "Ensystec-Leak-Protect",
| | |
| "group": "g-leakage",
| | После замены шаблона перезапустите сервисы: |
| "device": {
| |
| "name": "Ensystec Leak Protect",
| |
| "id": "ensystec_leak_protect",
| |
| "groups": [
| |
| {
| |
| "title": "Input 1",
| |
| "id": "input1"
| |
| },
| |
| {
| |
| "title": "Input 2",
| |
| "id": "input2"
| |
| },
| |
| {
| |
| "title": "Input 3",
| |
| "id": "input3"
| |
| },
| |
| {
| |
| "title": "Input 4",
| |
| "id": "input4"
| |
| },
| |
| {
| |
| "title": "Input 5",
| |
| "id": "input5"
| |
| },
| |
| {
| |
| "title": "Input 6",
| |
| "id": "input6"
| |
| },
| |
| {
| |
| "title": "Input 7",
| |
| "id": "input7"
| |
| },
| |
| {
| |
| "title": "Input 8",
| |
| "id": "input8"
| |
| },
| |
| {
| |
| "title": "Input 9",
| |
| "id": "input9"
| |
| },
| |
| {
| |
| "title": "Input 10",
| |
| "id": "input10"
| |
| },
| |
| {
| |
| "title": "Outputs",
| |
| "id": "outputs"
| |
| },
| |
| {
| |
| "title": "General",
| |
| "id": "general"
| |
| },
| |
| {
| |
| "title": "HW Info",
| |
| "id": "hw_info"
| |
| }
| |
| ],
| |
| "parameters": {
| |
| "address": {
| |
| "title": "Address",
| |
| "description": "address_description",
| |
| "address": 15,
| |
| "reg_type": "holding",
| |
| "format": "u8",
| |
| "default": 247,
| |
| "min": 1,
| |
| "max": 247,
| |
| "group": "general",
| |
| "order": 1
| |
| },
| |
| "baud_rate": {
| |
| "title": "Baud Rate",
| |
| "description": "baud_rate_description",
| |
| "address": 16,
| |
| "reg_type": "holding",
| |
| "enum": [
| |
| 255,
| |
| 254,
| |
| 253,
| |
| 251
| |
| ],
| |
| "default": 255,
| |
| "enum_titles": [
| |
| "9600 bps",
| |
| "19200 bps",
| |
| "57600 bps",
| |
| "115200 bps"
| |
| ],
| |
| "group": "general",
| |
| "order": 2
| |
| }
| |
| },
| |
| "channels": [
| |
| {
| |
| "name": "external_power_220_ac",
| |
| "reg_type": "holding",
| |
| "address": "4:1:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "group": "general",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "low_battery_voltage",
| |
| "reg_type": "holding",
| |
| "address": "4:2:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "leakage_sensor",
| |
| "reg_type": "holding",
| |
| "address": "4:0:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "leakage_sensor_control",
| |
| "reg_type": "holding",
| |
| "write_address": 5,
| |
| "type": "switch",
| |
| "on_value": 65535,
| |
| "off_value": 65407,
| |
| "group": "general",
| |
| "enabled": true,
| |
| "readonly": false
| |
| },
| |
| {
| |
| "name": "failure_sensor",
| |
| "reg_type": "holding",
| |
| "address": "4:3:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "alarm_reset",
| |
| "reg_type": "holding",
| |
| "address": "5:7:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "group": "general",
| |
| "enabled": false,
| |
| "off_value": 1,
| |
| "readonly": false
| |
| },
| |
| {
| |
| "name": "leak_protection_enabled",
| |
| "reg_type": "holding",
| |
| "address": "5:2:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "leak_protection_control",
| |
| "reg_type": "holding",
| |
| "write_address": 5,
| |
| "type": "switch",
| |
| "on_value": 65407,
| |
| "off_value": 65533,
| |
| "group": "general",
| |
| "enabled": true,
| |
| "readonly": false
| |
| },
| |
| {
| |
| "name": "leak_protection_disable_30min",
| |
| "reg_type": "holding",
| |
| "address": "5:1:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false,
| |
| "readonly": false
| |
| },
| |
| {
| |
| "name": "input_1",
| |
| "reg_type": "holding",
| |
| "address": "3:0:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input1",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "input_1_counter",
| |
| "reg_type": "holding",
| |
| "address": "17",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "format": "s32",
| |
| "group": "input1",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_1_open_circuit",
| |
| "reg_type": "holding",
| |
| "address": "3:1:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input1",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_2",
| |
| "reg_type": "holding",
| |
| "address": "3:2:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input2",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "input_2_counter",
| |
| "reg_type": "holding",
| |
| "address": "19",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "format": "s32",
| |
| "group": "input2",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_2_open_circuit",
| |
| "reg_type": "holding",
| |
| "address": "3:3:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input2",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_3",
| |
| "reg_type": "holding",
| |
| "address": "3:4:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input3",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "input_3_counter",
| |
| "reg_type": "holding",
| |
| "address": "21",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "format": "s32",
| |
| "group": "input3",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_3_open_circuit",
| |
| "reg_type": "holding",
| |
| "address": "3:5:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input3",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_4",
| |
| "reg_type": "holding",
| |
| "address": "3:6:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input4",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "input_4_counter",
| |
| "reg_type": "holding",
| |
| "address": "23",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "format": "s32",
| |
| "group": "input4",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_4_open_circuit",
| |
| "reg_type": "holding",
| |
| "address": "3:7:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input4",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_5",
| |
| "reg_type": "holding",
| |
| "address": "3:8:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input5",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "input_5_counter",
| |
| "reg_type": "holding",
| |
| "address": "25",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "format": "s32",
| |
| "group": "input5",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_5_open_circuit",
| |
| "reg_type": "holding",
| |
| "address": "3:9:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input5",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_6",
| |
| "reg_type": "holding",
| |
| "address": "3:10:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input6",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "input_6_counter",
| |
| "reg_type": "holding",
| |
| "address": "27",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "format": "s32",
| |
| "group": "input6",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_6_open_circuit",
| |
| "reg_type": "holding",
| |
| "address": "3:11:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input6",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_7",
| |
| "reg_type": "holding",
| |
| "address": "3:12:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input7",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "input_7_counter",
| |
| "reg_type": "holding",
| |
| "address": "29",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "format": "s32",
| |
| "group": "input7",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_7_open_circuit",
| |
| "reg_type": "holding",
| |
| "address": "3:13:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input7",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_8",
| |
| "reg_type": "holding",
| |
| "address": "3:14:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input8",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "input_8_counter",
| |
| "reg_type": "holding",
| |
| "address": "31",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "format": "s32",
| |
| "group": "input8",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_8_open_circuit",
| |
| "reg_type": "holding",
| |
| "address": "3:15:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input8",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_9",
| |
| "reg_type": "holding",
| |
| "address": "2:0:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input9",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "input_9_counter",
| |
| "reg_type": "holding",
| |
| "address": "33",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "format": "s32",
| |
| "group": "input9",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_9_open_circuit",
| |
| "reg_type": "holding",
| |
| "address": "2:1:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input9",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_10",
| |
| "reg_type": "holding",
| |
| "address": "2:2:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input10",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "input_10_counter",
| |
| "reg_type": "holding",
| |
| "address": "35",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "format": "s32",
| |
| "group": "input10",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "input_10_open_circuit",
| |
| "reg_type": "holding",
| |
| "address": "2:3:1",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "input10",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "output_k1",
| |
| "reg_type": "holding",
| |
| "write_address": 6,
| |
| "type": "switch",
| |
| "on_value": 3,
| |
| "off_value": 1,
| |
| "group": "outputs",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "output_k1_flag",
| |
| "reg_type": "holding",
| |
| "address": "6:0:1",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "enum": [
| |
| 0,
| |
| 1
| |
| ],
| |
| "enum_titles": [
| |
| "Done",
| |
| "In Progress"
| |
| ],
| |
| "group": "outputs",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "output_k1_status",
| |
| "reg_type": "holding",
| |
| "address": "4:8:2",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "enum": [
| |
| 0,
| |
| 1,
| |
| 2,
| |
| 3
| |
| ],
| |
| "enum_titles": [
| |
| "Closed",
| |
| "Opened",
| |
| "Undefined",
| |
| "Disconnected"
| |
| ],
| |
| "group": "outputs",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "output_k1_status_switch",
| |
| "reg_type": "holding",
| |
| "address": "4:8:2",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "off_value": 0,
| |
| "group": "outputs",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "output_k2",
| |
| "reg_type": "holding",
| |
| "write_address": 7,
| |
| "type": "switch",
| |
| "on_value": 3,
| |
| "off_value": 1,
| |
| "group": "outputs",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "output_k2_flag",
| |
| "reg_type": "holding",
| |
| "address": "7:0:1",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "enum": [
| |
| 0,
| |
| 1
| |
| ],
| |
| "enum_titles": [
| |
| "Done",
| |
| "In Progress"
| |
| ],
| |
| "group": "outputs",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "output_k2_status",
| |
| "reg_type": "holding",
| |
| "address": "4:10:2",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "enum": [
| |
| 0,
| |
| 1,
| |
| 2,
| |
| 3
| |
| ],
| |
| "enum_titles": [
| |
| "Closed",
| |
| "Opened",
| |
| "Undefined",
| |
| "Disconnected"
| |
| ],
| |
| "group": "outputs",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "output_k2_status_switch",
| |
| "reg_type": "holding",
| |
| "address": "4:10:2",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "off_value": 0,
| |
| "group": "outputs",
| |
| "enabled": true
| |
| },
| |
| {
| |
| "name": "output_k3",
| |
| "reg_type": "holding",
| |
| "write_address": 8,
| |
| "type": "switch",
| |
| "on_value": 3,
| |
| "off_value": 1,
| |
| "group": "outputs",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "output_k3_flag",
| |
| "reg_type": "holding",
| |
| "address": "8:0:1",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "enum": [
| |
| 0,
| |
| 1
| |
| ],
| |
| "enum_titles": [
| |
| "Done",
| |
| "In Progress"
| |
| ],
| |
| "group": "outputs",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "output_k3_status",
| |
| "reg_type": "holding",
| |
| "address": "4:12:2",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "enum": [
| |
| 0,
| |
| 1,
| |
| 2,
| |
| 3
| |
| ],
| |
| "enum_titles": [
| |
| "Closed",
| |
| "Opened",
| |
| "Undefined",
| |
| "Disconnected"
| |
| ],
| |
| "group": "outputs",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "output_k3_status_switch",
| |
| "reg_type": "holding",
| |
| "address": "4:12:2",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "off_value": 0,
| |
| "group": "outputs",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "output_k4",
| |
| "reg_type": "holding",
| |
| "write_address": 9,
| |
| "type": "switch",
| |
| "on_value": 3,
| |
| "off_value": 1,
| |
| "group": "outputs",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "output_k4_flag",
| |
| "reg_type": "holding",
| |
| "address": "9:0:1",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "enum": [
| |
| 0,
| |
| 1
| |
| ],
| |
| "enum_titles": [
| |
| "Done",
| |
| "In Progress"
| |
| ],
| |
| "group": "outputs",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "output_k4_status",
| |
| "reg_type": "holding",
| |
| "address": "4:14:2",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "enum": [
| |
| 0,
| |
| 1,
| |
| 2,
| |
| 3
| |
| ],
| |
| "enum_titles": [
| |
| "Closed",
| |
| "Opened",
| |
| "Undefined",
| |
| "Disconnected"
| |
| ],
| |
| "group": "outputs",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "output_k4_status_switch",
| |
| "reg_type": "holding",
| |
| "address": "4:14:2",
| |
| "readonly": true,
| |
| "type": "switch",
| |
| "off_value": 0,
| |
| "group": "outputs",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "external_led_control",
| |
| "reg_type": "holding",
| |
| "address": "14:4:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "led_1",
| |
| "reg_type": "holding",
| |
| "address": "14:6:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "led_2",
| |
| "reg_type": "holding",
| |
| "address": "14:7:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "led_3",
| |
| "reg_type": "holding",
| |
| "address": "14:8:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "led_4",
| |
| "reg_type": "holding",
| |
| "address": "14:9:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "led_5",
| |
| "reg_type": "holding",
| |
| "address": "14:10:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "led_6",
| |
| "reg_type": "holding",
| |
| "address": "14:11:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "led_7",
| |
| "reg_type": "holding",
| |
| "address": "14:12:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "led_8",
| |
| "reg_type": "holding",
| |
| "address": "14:13:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "led_9",
| |
| "reg_type": "holding",
| |
| "address": "14:14:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "led_10",
| |
| "reg_type": "holding",
| |
| "address": "14:15:1",
| |
| "type": "switch",
| |
| "on_value": 0,
| |
| "off_value": 1,
| |
| "group": "general",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "software_version",
| |
| "reg_type": "holding",
| |
| "address": "127:8:0",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "group": "hw_info",
| |
| "enabled": false
| |
| },
| |
| {
| |
| "name": "hardware_version",
| |
| "reg_type": "holding",
| |
| "address": "127:8:8",
| |
| "readonly": true,
| |
| "type": "value",
| |
| "group": "hw_info",
| |
| "enabled": false
| |
| }
| |
| ],
| |
| "translations": {
| |
| "en": {
| |
| "template_title": "Ensystec Leak Protect",
| |
| "address_description": "Make sure that communication with device is established before changing this parameter. Select required address, save configuration and then change device address to the same value",
| |
| "baud_rate_description": "Make sure that communication with device is established before changing this parameter. Select required baud rate, save configuration and then change port baud rate to the same value",
| |
| "input_1": "Input 1",
| |
| "input_1_counter": "Counter 1",
| |
| "input_1_open_circuit": "Input 1 - Open Circuit",
| |
| "input_2": "Input 2",
| |
| "input_2_counter": "Counter 2",
| |
| "input_2_open_circuit": "Input 2 - Open Circuit",
| |
| "input_3": "Input 3",
| |
| "input_3_counter": "Counter 3",
| |
| "input_3_open_circuit": "Input 3 - Open Circuit",
| |
| "input_4": "Input 4",
| |
| "input_4_counter": "Counter 4",
| |
| "input_4_open_circuit": "Input 4 - Open Circuit",
| |
| "input_5": "Input 5",
| |
| "input_5_counter": "Counter 5",
| |
| "input_5_open_circuit": "Input 5 - Open Circuit",
| |
| "input_6": "Input 6",
| |
| "input_6_counter": "Counter 6",
| |
| "input_6_open_circuit": "Input 6 - Open Circuit",
| |
| "input_7": "Input 7",
| |
| "input_7_counter": "Counter 7",
| |
| "input_7_open_circuit": "Input 7 - Open Circuit",
| |
| "input_8": "Input 8",
| |
| "input_8_counter": "Counter 8",
| |
| "input_8_open_circuit": "Input 8 - Open Circuit",
| |
| "input_9": "Input 9",
| |
| "input_9_counter": "Counter 9",
| |
| "input_9_open_circuit": "Input 9 - Open Circuit",
| |
| "input_10": "Input 10",
| |
| "input_10_counter": "Counter 10",
| |
| "input_10_open_circuit": "Input 10 - Open Circuit",
| |
| "output_k1": "Output K1",
| |
| "output_k1_flag": "Output K1 Flag",
| |
| "output_k1_status": "Output K1 State",
| |
| "output_k2": "Output K2",
| |
| "output_k2_flag": "Output K2 Flag",
| |
| "output_k2_status": "Output K2 State",
| |
| "output_k3": "Output K3",
| |
| "output_k3_flag": "Output K3 Flag",
| |
| "output_k3_status": "Output K3 State",
| |
| "output_k4": "Output K4",
| |
| "output_k4_flag": "Output K4 Flag",
| |
| "output_k4_status": "Output K4 State",
| |
| "external_power_220_ac": "External Power 220 AC",
| |
| "low_battery_voltage": "Low Battery Voltage",
| |
| "leakage_sensor": "Leak Detected",
| |
| "failure_sensor": "Failure Sensor",
| |
| "external_led_control": "External LED Control",
| |
| "led_1": "LED 1",
| |
| "led_2": "LED 2",
| |
| "led_3": "LED 3",
| |
| "led_4": "LED 4",
| |
| "led_5": "LED 5",
| |
| "led_6": "LED 6",
| |
| "led_7": "LED 7",
| |
| "led_8": "LED 8",
| |
| "led_9": "LED 9",
| |
| "led_10": "LED 10",
| |
| "software_version": "Software Version",
| |
| "hardware_version": "Hardware Version",
| |
| "alarm_reset": "Alarm Reset",
| |
| "leak_protection_enabled": "Leak Protection Status",
| |
| "leak_protection_disable_30min": "Disable Leak Protection for 30 min",
| |
| "leak_protection_control": "Leak Protection Control",
| |
| "leakage_sensor_control": "Leak Reset",
| |
| "output_k1_status_switch": "Output K1 Status",
| |
| "output_k2_status_switch": "Output K2 Status",
| |
| "output_k3_status_switch": "Output K3 Status",
| |
| "output_k4_status_switch": "Output K4 Status"
| |
| },
| |
| "ru": {
| |
| "template_title": "Ensystec - защита от протечки",
| |
| "Input 1": "Вход 1",
| |
| "Input 2": "Вход 2",
| |
| "Input 3": "Вход 3",
| |
| "Input 4": "Вход 4",
| |
| "Input 5": "Вход 5",
| |
| "Input 6": "Вход 6",
| |
| "Input 7": "Вход 7",
| |
| "Input 8": "Вход 8",
| |
| "Input 9": "Вход 9",
| |
| "Input 10": "Вход 10",
| |
| "Outputs": "Выходы",
| |
| "General": "Общее",
| |
| "HW Info": "Данные модуля",
| |
| "input_1": "Вход 1",
| |
| "input_1_counter": "Счетчик 1",
| |
| "input_1_open_circuit": "Вход 1 - обрыв",
| |
| "input_2": "Вход 2",
| |
| "input_2_counter": "Счетчик 2",
| |
| "input_2_open_circuit": "Вход 2 - обрыв",
| |
| "input_3": "Вход 3",
| |
| "input_3_counter": "Счетчик 3",
| |
| "input_3_open_circuit": "Вход 3 - обрыв",
| |
| "input_4": "Вход 4",
| |
| "input_4_counter": "Счетчик 4",
| |
| "input_4_open_circuit": "Вход 4 - обрыв",
| |
| "input_5": "Вход 5",
| |
| "input_5_counter": "Счетчик 5",
| |
| "input_5_open_circuit": "Вход 5 - обрыв",
| |
| "input_6": "Вход 6",
| |
| "input_6_counter": "Счетчик 6",
| |
| "input_6_open_circuit": "Вход 6 - обрыв",
| |
| "input_7": "Вход 7",
| |
| "input_7_counter": "Счетчик 7",
| |
| "input_7_open_circuit": "Вход 7 - обрыв",
| |
| "input_8": "Вход 8",
| |
| "input_8_counter": "Счетчик 8",
| |
| "input_8_open_circuit": "Вход 8 - обрыв",
| |
| "input_9": "Вход 9",
| |
| "input_9_counter": "Счетчик 9",
| |
| "input_9_open_circuit": "Вход 9 - обрыв",
| |
| "input_10": "Вход 10",
| |
| "input_10_counter": "Счетчик 10",
| |
| "input_10_open_circuit": "Вход 10 - обрыв",
| |
| "output_k1": "Кран 1",
| |
| "output_k1_flag": "Кран 1 - команда",
| |
| "output_k1_status": "Кран 1 состояние",
| |
| "output_k2": "Кран 2",
| |
| "output_k2_flag": "Кран 2 - команда",
| |
| "output_k2_status": "Кран 2 состояние",
| |
| "output_k3": "Кран 3",
| |
| "output_k3_flag": "Кран 3 - команда",
| |
| "output_k3_status": "Кран 3 состояние",
| |
| "output_k4": "Кран 4",
| |
| "output_k4_flag": "Кран 4 - команда",
| |
| "output_k4_status": "Кран 4 состояние",
| |
| "Done": "Выполнено",
| |
| "In Progress": "Выполнение",
| |
| "Closed": "Закрыт",
| |
| "Opened": "Открыт",
| |
| "Undefined": "Не определено",
| |
| "Disconnected": "Не подключен",
| |
| "Address": "Адрес",
| |
| "Baud Rate": "Скорость обмена",
| |
| "9600 bps": "9600 бит/с",
| |
| "19200 bps": "19200 бит/с",
| |
| "57600 bps": "57600 бит/с",
| |
| "115200 bps": "115200 бит/с",
| |
| "address_description": "Перед изменением параметра убедитесь, что связь с устройством установлена. Выберите нужный адрес, сохраните конфигурацию, а затем укажите в настройках устройства этот же адрес",
| |
| "baud_rate_description": "Перед изменением параметра убедитесь, что связь с устройством установлена. Выберите нужную скорость обмена, сохраните конфигурацию, а затем укажите в настройках порта эту же скорость",
| |
| "external_power_220_ac": "Внешнее питание 220 В",
| |
| "low_battery_voltage": "Низкий уровень заряда",
| |
| "leakage_sensor": "Обнаружена протечка",
| |
| "failure_sensor": "Обрыв датчика",
| |
| "external_led_control": "Управление светодиодами",
| |
| "led_1": "Светодиод 1",
| |
| "led_2": "Светодиод 2",
| |
| "led_3": "Светодиод 3",
| |
| "led_4": "Светодиод 4",
| |
| "led_5": "Светодиод 5",
| |
| "led_6": "Светодиод 6",
| |
| "led_7": "Светодиод 7",
| |
| "led_8": "Светодиод 8",
| |
| "led_9": "Светодиод 9",
| |
| "led_10": "Светодиод 10",
| |
| "software_version": "Версия прошивки",
| |
| "hardware_version": "Версия контроллера",
| |
| "alarm_reset": "Сброс аварии",
| |
| "leak_protection_enabled": "Статус защиты от протечки",
| |
| "leak_protection_disable_30min": "Отключить защиту на 30 минут",
| |
| "leak_protection_control": "Управление защитой от протечки",
| |
| "leakage_sensor_control": "Сброс протечки",
| |
| "output_k1_status_switch": "Кран 1 статус",
| |
| "output_k2_status_switch": "Кран 2 статус",
| |
| "output_k3_status_switch": "Кран 3 статус",
| |
| "output_k4_status_switch": "Кран 4 статус"
| |
| }
| |
| }
| |
| }
| |
| }
| |
|
| |
|
| | <pre> |
| | systemctl restart wb-mqtt-confed |
| | systemctl restart wb-mqtt-serial |
| </pre> | | </pre> |
| | |
| | Общая инструкция: [[Пользовательские шаблоны устройств Wiren Board]]. |
| | |
| | == Связанные статьи == |
| | |
| | * [[Подключение Ensystec в XIOT через Wirenboard]] |
| | * [[Пользовательские шаблоны устройств Wiren Board]] |
